Scrabble Drink Coaster Tutorial

Did your P go under the sofa? Lose your S over a heated game? Do you have a Scrabble game sitting around that is missing letter tiles? Well I have the perfect tutorial for you!

Recycle those Scrabble tiles and make clever and quirky coasters. A set would make a great Father’s day or house warming gift.

Supplies:
16 Scrabble tiles (makes one coaster)
Xacto or Utility Knife
Ruler
E-6000 Glue
4” x 4” piece of thin cork that can be cut with an Xacto Knife*
Paper towel

*Note: I used Project Cork that I purchased at a Joann’s Store however you can also find it on Amazon. If you use this cork you want to unroll it and sit it under a heavy book so to remove the curl that the roll causes. Plus if it is very thin you might want to double it up.

  1. The coaster will be four tiles wide and four tiles high. Take your Scrabble tiles and figure out what letters you would like to use. I choose to use four 4-letter words that have something to do with beverages. Here are some suggestions:
    · Beer, Brew, Hops & Pint
    · Stir, Lime, Iced & Salt
    · Wine, Pour, Vine & Cork
    · Java, Shot, Bean & Teas
  2. Lightly sand the back of all the tiles so the glue has a stronger hold.
  3. Using the E-6000 (in a well ventilated area), put an even layer of glue on the back side of the first tile. Glue it to the upper right hand corner of the cork making sure the top and right edge is flush with the cork.
  4. Take the glue and run it along the right side of the tile you just placed. Be sure not to use too much glue.
  5. Glue the back of the second tile and place the it to the right of the first. Squeeze the tiles tightly together. If the glue oozes out the top or sides wipe it off carefully with a paper towel.
  6. Glue the remaining tiles in place, remember to place a bead of glue between the edges of the tiles that are adjacent to each other.
  7. Let the tiles dry overnight.
  8. Trim off the edges of the cork and pour yourself a drink.


Share This Post

More To Explore